Mobile Cranes & Access Lifts

We deliver battery powered cranes, scissor lifts and transporters for use in potentially explosive atmospheres (ex-zone 1 and 2). Our mobile cranes can be used at sea on ships and on semi-submersible rigs.

Mini-Crane

Battery powered crane for use in ATEX zone 1. The Mobile Mini Crane is designed to operate in narrow spaces. The crane has a 2 wheel drive and a 4 wheel steering to achieve a very small turning radius.

Safety features such as overload system according to NORSOK and EN standards is implemented into the design.

Remote controlled lifting and driving.

Equinor references:

  • Aasta Hansteen (SPAR)
  • Snorre A (TLP)
  • Johan Castberg (FPSO)

Technical data:

  • Lift capacity:
    • 700 kg @ 2.4 meters
    • 430 kg @ 3.7 meters
  • Width: 640 mm
  • Length: 2000 mm
  • 4-wheel steering.
  • 270°crane slewing
  • Overload prevention

ATEX II 2G Ex IIA T3 (Zone 1)

Back to top

Scissor Lifts for marine and offshore use

Stavanger Engineering offers a range of drivable and skiddable scissor lifts designed for safe access in marine environments. Each unit can be tailored to meet specific project requirements.

 

The lifts are engineered to withstand vessel accelerations and wind loads typical of semi-submersible rigs and offshore vessels. They are suitable for use in hazardous (Ex) environments, including Zone 1 and Zone 2, and are available with electrical, battery-powered, or external hydraulic drive systems.

Stack Access LiftLift for general accessLift for general accessLift for general accessLift for riser maintenaceLift for riser maintenaceLift for riser maintenace

Back to top

Tracked fork-lift

TRACKED FORKLIFT – ATEX ZONE 1

  • ATEX II 2G Ex IIA T3 (Zone 1)
  • Lift capacity: 1700 kg (other
  • Track retract sideways for small footprint
  • Short length for use in more narrow space than normal forklift.
  • Low footprint for use on deck with limited capacity.

 

Back to top

Rig-up Frames with high-risk application lifting

Our rig-up frames are used to increase effective lubricator length for wireline operation on fixed platform. The frames are running on wheels or tracks and are used to remove hatch on hatch-deck. The rig-up frames typically have 3 winches that are used for rigging up wireline equipment.

Two of the winches are designed to be synchronized according to the requirements to high-risk application lift in NORSOK R-002, enabling lifting above equipment with hydrocarbons under pressure.

All equipment can be built according to European ATEX, North American IECex and Canadian CSA Ex. zone 1 and 2.

Back to top